DYNA 4441 3.78L DYNAMATRIX HB-2 Satin Finish Interlocking Concrete Pavers and Slabs Solvent Based Pr
DYNA 4441 3.78L DYNAMATRIX HB-2 Satin Finish Interlocking Concrete Pavers and Slabs Solvent Based Pr
DYNA 4441 3.78L DYNAMATRIX HB-2 Satin Finish Interlocking Concrete Pavers and Slabs Solvent Based Protective Sealant is a high end Acrylic Sealant specifically designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet look finish.
Carefully blended with thermoplastic resins and refined solvents, Dynamatrix® HB2 Protective Sealant is suitable for use in all weather conditions. It will offer you a rich and durable finish that withstands heat, sun, salts, frost and all aggressive weather elements. It will not peel, delaminate or yellow.
Features
- HB-2 gives a satin finish
- Penetrates deeply for better and more durable protection against stains, oil, and dirt
- Stabilizes the jointing sand
- Adequate Solids Content for Interlocking Concrete Pavers (20 %)
- Clear Satin Look Finish, enhances the colors of the treated surface
- Reduces damages due to freeze-thaw cycles
- Resists all weather elements (sun, rain, frost, heat, salt, etc.)
- Will not trap moisture after fully cured
- Reduces moulds and moss growths
- Does not peel or yellow
- For interior and exterior uses (UV stable), it can be applied on colored porous concrete surfaces: Interlocking Concrete Pavers, Stamped or Patterned Concrete, Exposed Aggregate Surfaces, and Natural and Decorative Veneers
- 150 to 200 square feet per 3.78 L (1 gallon) depending on the surface treated
Specifications
| Colour | Clear, water-like liquid |
| Odour | Hydrocarbon |
| Flash Point | > 38 - 50 °C |
| Specific Gravity | .88 g/ml |
| Application Temperature | 45 to 95 °F (7 to 35 °C) |
| Boiling Point | 150 - 185 °C |
| Freezing Point | |
| Touch Dry | 30 to 60 Minutes |
| Re-Coat | 2 to 4 Hours |
| Complete Cure | 48 Hours |
| Slip Resistance | Excellent |
| Hot Tire Pick-Up Resistance | Excellent |
| Flexibility | Excellent |
| Chemical Resistance | Resists airborne pollutants, oil, yellowing, de-icing salt, acid rain, chlorine |
Original: $50.96
-65%$50.96
$17.84DYNA 4441 3.78L DYNAMATRIX HB-2 Satin Finish Interlocking Concrete Pavers and Slabs Solvent Based Pr
DYNA 4441 3.78L DYNAMATRIX HB-2 Satin Finish Interlocking Concrete Pavers and Slabs Solvent Based Protective Sealant is a high end Acrylic Sealant specifically designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet look finish.
Carefully blended with thermoplastic resins and refined solvents, Dynamatrix® HB2 Protective Sealant is suitable for use in all weather conditions. It will offer you a rich and durable finish that withstands heat, sun, salts, frost and all aggressive weather elements. It will not peel, delaminate or yellow.
Features
- HB-2 gives a satin finish
- Penetrates deeply for better and more durable protection against stains, oil, and dirt
- Stabilizes the jointing sand
- Adequate Solids Content for Interlocking Concrete Pavers (20 %)
- Clear Satin Look Finish, enhances the colors of the treated surface
- Reduces damages due to freeze-thaw cycles
- Resists all weather elements (sun, rain, frost, heat, salt, etc.)
- Will not trap moisture after fully cured
- Reduces moulds and moss growths
- Does not peel or yellow
- For interior and exterior uses (UV stable), it can be applied on colored porous concrete surfaces: Interlocking Concrete Pavers, Stamped or Patterned Concrete, Exposed Aggregate Surfaces, and Natural and Decorative Veneers
- 150 to 200 square feet per 3.78 L (1 gallon) depending on the surface treated
Specifications
| Colour | Clear, water-like liquid |
| Odour | Hydrocarbon |
| Flash Point | > 38 - 50 °C |
| Specific Gravity | .88 g/ml |
| Application Temperature | 45 to 95 °F (7 to 35 °C) |
| Boiling Point | 150 - 185 °C |
| Freezing Point | |
| Touch Dry | 30 to 60 Minutes |
| Re-Coat | 2 to 4 Hours |
| Complete Cure | 48 Hours |
| Slip Resistance | Excellent |
| Hot Tire Pick-Up Resistance | Excellent |
| Flexibility | Excellent |
| Chemical Resistance | Resists airborne pollutants, oil, yellowing, de-icing salt, acid rain, chlorine |
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
DYNA 4441 3.78L DYNAMATRIX HB-2 Satin Finish Interlocking Concrete Pavers and Slabs Solvent Based Protective Sealant is a high end Acrylic Sealant specifically designed to protect and enhance the look of Interlocking Concrete Pavers and Slabs. It penetrates deeply into the substrate for a maximum protection against most stains (oil, gasoline, gum, tar, rubber, rust, etc.) while rendering a clear wet look finish.
Carefully blended with thermoplastic resins and refined solvents, Dynamatrix® HB2 Protective Sealant is suitable for use in all weather conditions. It will offer you a rich and durable finish that withstands heat, sun, salts, frost and all aggressive weather elements. It will not peel, delaminate or yellow.
Features
- HB-2 gives a satin finish
- Penetrates deeply for better and more durable protection against stains, oil, and dirt
- Stabilizes the jointing sand
- Adequate Solids Content for Interlocking Concrete Pavers (20 %)
- Clear Satin Look Finish, enhances the colors of the treated surface
- Reduces damages due to freeze-thaw cycles
- Resists all weather elements (sun, rain, frost, heat, salt, etc.)
- Will not trap moisture after fully cured
- Reduces moulds and moss growths
- Does not peel or yellow
- For interior and exterior uses (UV stable), it can be applied on colored porous concrete surfaces: Interlocking Concrete Pavers, Stamped or Patterned Concrete, Exposed Aggregate Surfaces, and Natural and Decorative Veneers
- 150 to 200 square feet per 3.78 L (1 gallon) depending on the surface treated
Specifications
| Colour | Clear, water-like liquid |
| Odour | Hydrocarbon |
| Flash Point | > 38 - 50 °C |
| Specific Gravity | .88 g/ml |
| Application Temperature | 45 to 95 °F (7 to 35 °C) |
| Boiling Point | 150 - 185 °C |
| Freezing Point | |
| Touch Dry | 30 to 60 Minutes |
| Re-Coat | 2 to 4 Hours |
| Complete Cure | 48 Hours |
| Slip Resistance | Excellent |
| Hot Tire Pick-Up Resistance | Excellent |
| Flexibility | Excellent |
| Chemical Resistance | Resists airborne pollutants, oil, yellowing, de-icing salt, acid rain, chlorine |
